Filters
Clear all
Selected Country and Event filters (0)
No filters selected
Clear all
Filters
Simtech
F-16 Leading Edge Flap Actuators
Curtiss-Wright manufactures the preferred configuration of F-16 LEF Rotary Actuators and Torque Shafts. Simtech has been Curtiss-Wright’s distributor for this product line since 2009.
The F-16 uses two Curtiss-Wright LEF Rotary Actuator configurations: pre-block 40 and post-block 40. Most of the Torque Shafts are interchangeable between the configurations, but the Actuators are specific to the configuration.
The F-16 uses two Curtiss-Wright LEF Rotary Actuator configurations: pre-block 40 and post-block 40. Most of the Torque Shafts are interchangeable between the configurations, but the Actuators are specific to the configuration.
Featured Products
Products from platform partners appearing at events across the globe
Exposibram 2026
Sure Align Tracker
Syntron Material Handling
The Link-Belt® Sure Align Tracker by Conveyors Plus is a belt conveyor alignment system for the mining, oil, gas, and material handling sectors. It is an affordable and proven system that immediately increases safety, productivity, and cost savings. Since its inception in 2004, the Sure Align Tracker has experienced widespread acceptance of this innovative and highly successful alignment system in major mines worldwide. Systems are currently installed with Newmont, FMI, Xstrata, BHP, Lafarge, Barrick, Rio Tinto, Vale, Goldcorp, Detour, Codelco, IOC, Brigus Gold, DeBeers Diamond Mines, Coal mines, CNRL Oil Sands and Potash Corporation.
The belt trackers are used on belt widths from 12 to 160 inches. The rollers are manufactured with half-inch rubber lagging, and the return trackers are installed on the clean side of the belt. The trackers are proven effective on belts ranging from slow-speed feeder belts (less than 0.1MPS or 0.3FPS) to high-speed belts (up to 7MPS or 23 FPS).
The belt trackers are used on belt widths from 12 to 160 inches. The rollers are manufactured with half-inch rubber lagging, and the return trackers are installed on the clean side of the belt. The trackers are proven effective on belts ranging from slow-speed feeder belts (less than 0.1MPS or 0.3FPS) to high-speed belts (up to 7MPS or 23 FPS).
Exposibram 2026
About - Whelen Engineering Company, Inc.
Whelen Engineering Company Inc.
Whelen has the largest design staff in the industry and over 1,200 employees, all dedicated to producing products that people count on when lives are on the line. Every part of every Whelen product is proudly designed and manufactured in America and is tested on-site to meet the toughest industry certifications.
Exposibram 2026
Rodamientos de Rodillos Esféricos
NSK Latin America Inc.
Los rodamientos de rodillos esféricos están disponibles en los tipos EA, C, CD y CA, diseñados para una gran capacidad de carga. Los tipos EA, C y CD tienen jaulas de acero prensado, mientras que el CA utiliza jaulas de latón mecanizado. Todos los tipos EA son rodamientos estándar de alto rendimiento de la serie NSKHPS.
Los rodamientos de la serie NSKHPS tienen una capacidad de carga especialmente elevada, altas velocidades límite y un excelente rendimiento a temperaturas de hasta 200°C.
Las designaciones con el sufijo «E4» tienen una ranura de aceite y orificios en el anillo exterior. Dado que la profundidad de la ranura de aceite en estos rodamientos es limitada, recomendamos utilizar también una ranura de aceite en el agujero del soporte.
Los rodamientos de la serie NSKHPS tienen una capacidad de carga especialmente elevada, altas velocidades límite y un excelente rendimiento a temperaturas de hasta 200°C.
Las designaciones con el sufijo «E4» tienen una ranura de aceite y orificios en el anillo exterior. Dado que la profundidad de la ranura de aceite en estos rodamientos es limitada, recomendamos utilizar también una ranura de aceite en el agujero del soporte.
Exposibram 2026
Exhibitors Lounge
Kallman Worldwide, Inc.
“The Meeting Point” is a private lounge where exhibitors can meet with guests, take a break from the show floor, and connect with industry peers. The Kallman Café serves refreshments throughout the day, offers a place to charge your phone, and provides exclusive WiFi service.
Exposibram 2026
Autonomous Haulage System
Pronto
Pronto’s Autonomous Haulage System (AHS) makes mining autonomy simple, fast, and practical. Our solution is as easy as driving from point A to point B.
A haul route is learned after a mining operator drives it manually just once. From there, trucks can be dispatched to saved routes directly from a smartphone using Pronto’s intuitive mobile app. This streamlined approach significantly reduces the time, cost, and complexity of introducing autonomy into existing fleets—without the need for major infrastructure changes.
Designed for Rapid Deployment: Pronto’s AHS is built for real-world mining operations. The system is fully retrofit, requires little to no site modification, and enables operators to scale autonomy quickly and efficiently.
Advanced Safety, Built In: To meet the stringent safety requirements of mine operators, Pronto delivers a turnkey software-and-hardware solution that includes:
* Precise situational awareness using computer vision and GNSS
* A rugged camera- and GPS-based hardware stack that is lighter, faster, and more cost-effective than radar- or lidar-based systems
* Advanced machine learning object detection to reduce false positives and minimize downtime
* Retrofit drive-by-wire kits for precise vehicle control across multiple vehicle types
* Configurable software to support site-specific safeguards and customized rules of the road
* All-stop buttons in manually operated equipment, fully integrated with the AHS for immediate response
A haul route is learned after a mining operator drives it manually just once. From there, trucks can be dispatched to saved routes directly from a smartphone using Pronto’s intuitive mobile app. This streamlined approach significantly reduces the time, cost, and complexity of introducing autonomy into existing fleets—without the need for major infrastructure changes.
Designed for Rapid Deployment: Pronto’s AHS is built for real-world mining operations. The system is fully retrofit, requires little to no site modification, and enables operators to scale autonomy quickly and efficiently.
Advanced Safety, Built In: To meet the stringent safety requirements of mine operators, Pronto delivers a turnkey software-and-hardware solution that includes:
* Precise situational awareness using computer vision and GNSS
* A rugged camera- and GPS-based hardware stack that is lighter, faster, and more cost-effective than radar- or lidar-based systems
* Advanced machine learning object detection to reduce false positives and minimize downtime
* Retrofit drive-by-wire kits for precise vehicle control across multiple vehicle types
* Configurable software to support site-specific safeguards and customized rules of the road
* All-stop buttons in manually operated equipment, fully integrated with the AHS for immediate response
Exposibram 2026
Pavilion Special Events
Kallman Worldwide, Inc.
If it’s on our schedule, you’re invited. As an exhibitor in the Partnership Pavilion, in addition to official show events you also have exclusive access to official Pavilion events. Exhibitors benefit from exclusive access to the Partnership Pavilion events, including the official Pavilion Opening Ceremony and Ribbon-Cutting, off and on-site hospitality receptions, networking events, business and market insight briefings, and topical industry presentations.
Products
Alta Max, LLC - Specialty Packaging | Industrial Supplies
Alta Max, LLC
Founded 2001, Alta Max has a longstanding reputation as a mission-critical provider of specialty packaging and industrial supplies. Since inception, Alta Max has provided specialty packaging and other products to the DOD and other key prime contractors for munitions / energetics and other applications.
Alta Max manufactures all types of packaging products made from materials including, but not limited to, corrugated, paperboard, solid fiber, felt, wood, cork, foam, plastics, Mil-PRF-50449 board, etc. for the munitions and energetics industry. The Company also provides a wide range of tamper evident security products (cable, bolt, Alucast 911, and plastic tamper evident seals). Alta Max is also an authorized distributor of MRO / Industrial Supplies; a distributor of Security Seal products; and Guardiar Fence Systems and Perimeter Security Solutions.
Alta Max Services & Products include the following:
Specialty Packaging Manufacturing
Corrugated Box Stitching
Contract Assembly, Kitting & Packaging
Ammunition Can Stenciling & Labeling
Packaging Research & Development and Design
Security Seals & Logistics-related Products
Warehousing & Distribution
Strategic Sourcing and Procurement
Industrial Supplies
- MRO Products
- Tamper Evident Security Seals
- Guardiar Security Fencing
Alta Max manufactures all types of packaging products made from materials including, but not limited to, corrugated, paperboard, solid fiber, felt, wood, cork, foam, plastics, Mil-PRF-50449 board, etc. for the munitions and energetics industry. The Company also provides a wide range of tamper evident security products (cable, bolt, Alucast 911, and plastic tamper evident seals). Alta Max is also an authorized distributor of MRO / Industrial Supplies; a distributor of Security Seal products; and Guardiar Fence Systems and Perimeter Security Solutions.
Alta Max Services & Products include the following:
Specialty Packaging Manufacturing
Corrugated Box Stitching
Contract Assembly, Kitting & Packaging
Ammunition Can Stenciling & Labeling
Packaging Research & Development and Design
Security Seals & Logistics-related Products
Warehousing & Distribution
Strategic Sourcing and Procurement
Industrial Supplies
- MRO Products
- Tamper Evident Security Seals
- Guardiar Security Fencing
Video - Sabre Series
Belleville Boot Company
USA made and Berry Compliant, the Belleville SABRE boot provides lightweight toughness in rugged terrain. With its aggressive styling and other special features, including the exclusive Vibram® Ibex outsole, the Sabre boot is built to provide stability and support to keep you mobile in any environment.
Pierside Hermaphroditic Fiber Optic Connector (6 CH)
Optical Cable Corporation
OCC’s Pierside family of fiber optic connectors is designed to meet the stringent Pierside performance specifications (NAVSEA 737971 performance and 7379172) and is an ideal connector system for much more than ship-to-shore communications. The Pierside connector provides a genderless mating system perfect for applications requiring high performance in single-mode, multimode or composite configurations in extreme environments. In addition, this connector is an excellent choice for other applications including broadcast, mining, land tactical, control systems, and more.
The OCC Pierside family of fiber optic connectors affords users the most comprehensive complement of connector options available, including replacement dust caps, strain-relief receptacles and 90° plugs, etc. Available in either single-mode, multimode or a combination of both, the design is compliant to the Commercial Item Description (CID) standard issued by the Naval Sea Command.
• Easy and manageable installations. The Pierside connector provides a true hermaphroditic design, allowing this connector to mate plug-to-plug or plug-to-receptacle. This allows for flexibility and quick fiber system deployments when multiple units are daisy-chained together. As one of the only manufacturers providing a true hermaphroditic dust cap as a standard, OCC's Pierside is capable of mating without regard for male or female gender of the interfacing connector.
• Standards compliant. Available in single-mode, multimode or a combination of both, Pierside is compliant with the Commercial Item Description (CID) standard issued by the Naval Sea Command.
• Comprehensive options for a variety of uses. OCCs Pierside affords the most comprehensive complement of options available, including hermaphroditic or standard dust caps, strain-relief receptacles, 90 plugs and more. The interchangeable Detachable Socket Insert (DSI) and termini enable users to replace components as needed. Pierside is interoperable with other connectors complying to the same standard and features a hermaphroditic dust cap as a standard provision.
The OCC Pierside family of fiber optic connectors affords users the most comprehensive complement of connector options available, including replacement dust caps, strain-relief receptacles and 90° plugs, etc. Available in either single-mode, multimode or a combination of both, the design is compliant to the Commercial Item Description (CID) standard issued by the Naval Sea Command.
• Easy and manageable installations. The Pierside connector provides a true hermaphroditic design, allowing this connector to mate plug-to-plug or plug-to-receptacle. This allows for flexibility and quick fiber system deployments when multiple units are daisy-chained together. As one of the only manufacturers providing a true hermaphroditic dust cap as a standard, OCC's Pierside is capable of mating without regard for male or female gender of the interfacing connector.
• Standards compliant. Available in single-mode, multimode or a combination of both, Pierside is compliant with the Commercial Item Description (CID) standard issued by the Naval Sea Command.
• Comprehensive options for a variety of uses. OCCs Pierside affords the most comprehensive complement of options available, including hermaphroditic or standard dust caps, strain-relief receptacles, 90 plugs and more. The interchangeable Detachable Socket Insert (DSI) and termini enable users to replace components as needed. Pierside is interoperable with other connectors complying to the same standard and features a hermaphroditic dust cap as a standard provision.
INTRODUCING THE RESQR
Rithem Life Sciences
A revolutionary CPR aid that helps you respond with confidence in an emergency.
Public Safety Vehicles (Video)
Polaris Government and Defense
Polaris® Government & Defense is dedicated to fire-fighting, rescue, and law enforcement professionals. These highly mobile RANGER® vehicles allow for organi...
Wave® LED Magnifier
Burton Medical
Wave LED is a magnifier for a variety of applications. Wave LED offer shadow-free magnification with light coming from both sides, as well as three-dimensional magnification with light coming from the left or right. The 3D-feature is especially welcome when working with delicate objects.
무장장착대(Bomb Rack Unit & Pylon Unit)
CTLA
The first step toward armed helicopters
The Bomb Rack Unit (BRU) is a device installed on a helicopter’s Stub-wing to mount various armaments such as rocket launchers and air-to-ground missiles, and it consists of a Pylon Unit and a Bomb Rack Unit.
CTLA’s Bomb Rack Unit is equipped with a Boresight function that allows vertical (up/down) and horizontal (left/right) angle adjustments, and a solenoid-actuated free-fall weapon release (Jettison) method is applied.
CTLA’s Bomb Rack Unit has passed the system tests for the Light Armed Helicopter (LAH) and received suitability certification, and it is currently in mass production.
The Bomb Rack Unit (BRU) is a device installed on a helicopter’s Stub-wing to mount various armaments such as rocket launchers and air-to-ground missiles, and it consists of a Pylon Unit and a Bomb Rack Unit.
CTLA’s Bomb Rack Unit is equipped with a Boresight function that allows vertical (up/down) and horizontal (left/right) angle adjustments, and a solenoid-actuated free-fall weapon release (Jettison) method is applied.
CTLA’s Bomb Rack Unit has passed the system tests for the Light Armed Helicopter (LAH) and received suitability certification, and it is currently in mass production.
TrakkaBeam TL-360-M
Trakka Systems
The revolutionary new TrakkaBeam® TL-360-M LED/LEP hybrid searchlight provides operators with 360° illumination, using 1/3 the total power consumption of other systems in its class. The LED/LEP hybrid technology provides ultra-long-duration brightness with no light drop-off and increased mean time between failure (MTBF) of competing technologies. The TL-360-M is ideal for platforms that don’t want to compromise capabilities for lighter weight and smaller size.
Preowned C-Arm
Technomed Medical Parts & Equipment (Legal: Can Technomed Trading LTD.)
At Technomed, we stock high-quality used and refurbished C-Arm imaging systems modeled to suit your needs in the clinic. As a trusted distributor of top brands with a very well-qualified technical support team, we ensure our customers get nothing but the best for their practice. Our inventory has grown with the addition of advanced models capable of resisting all the challenges of modern healthcare, hence allowing improved performance and longevity. Discover Our C-Arm Systems Reach out to us today and let us take you through our Technomed C-Arm imaging systems today, whether pre-owned equipment or refurbished options. Feel the difference high technology makes in imaging as it enhances patient care. The Technomed Medical Parts and Equipment Company operates at the development of highly innovative imaging solutions, including C-Arm systems, utilized by medical treatment facilities globally. Expect quality, innovation, and incomparable service from us.
Tactical Plate Carriers, Chest Rigs & Platforms
Condor Outdoor Products, Inc.
Customize your loadout to meet the mission's needs by utilizing modular plate carriers, chest rigs and tactical vests from Condor Outdoor Products, Inc.
Veraseal 2 Front 1442x1536
Sleepnet Corporation
Blog
R&D MEDICAL PRODUCTS
Keep up to date with R&D by visiting our blog.
Digital Thermometer
Phoenix Healthcare Solutions, LLC
Thermometers: How to Take your Temperature An accurate reading of a person's temperature is a vital tool in managing illness. Here are the different types of thermometers and how to use them, along with information on when it's time to call your healthcare provider. Why should I take my temperature?
DYNAMICA ROPES APS
Fortune Oilfield General Trading
At Dynamica Ropes, we manufacture our rope solutions with HMPE/Dyneema in order to offer you the lightest, strongest and most reliable solution possible.
PowerMax 1260
Source-Ray, Inc.
The PowerMax-1260 Portable X-ray System combines lightweight maneuverability with maximum power, making it suitable for various applications. In addition, with high reliability and low maintenance, the state-of-the-art system offers an easy upgrade path for clinical sites transitioning to digital imaging.
The PowerMax 1260 was designed for the military with agility in mind. Its compact, lightweight construction makes it easy for the operator to move the system effortlessly.
Delivering maximum mR/mAs, the PowerMax 1260 produces 3kW of power across the entire kV range and provides hospital quality imaging and offers an easy upgrade path for clinical sites transitioning to Digital Imaging.
The PowerMax 1260 was designed for the military with agility in mind. Its compact, lightweight construction makes it easy for the operator to move the system effortlessly.
Delivering maximum mR/mAs, the PowerMax 1260 produces 3kW of power across the entire kV range and provides hospital quality imaging and offers an easy upgrade path for clinical sites transitioning to Digital Imaging.
ALUMINUM & BRASS PARTS
Martin Machine
Martin Machine produces custom machined parts in aluminum and brass alloys for a variety of industries. Our machining capabilities include turning, milling, drilling, tapping, and related processes, with many jobs being run on our modern CNC automatic bar load lathes. We can custom machine your requirements from round and square bar, tubing, angles, and flat stock.
These custom machined parts are used in many applications, including:
Electronic and other power related applications
Construction and building supplies
Glass and other process equipment
Agricultural and construction equipment
Industrial equipment
We have worked with these popular materials (other materials available upon request)
6061 Aluminum
6063 Aluminum
C36000 Free Cutting Brass
These custom machined parts are used in many applications, including:
Electronic and other power related applications
Construction and building supplies
Glass and other process equipment
Agricultural and construction equipment
Industrial equipment
We have worked with these popular materials (other materials available upon request)
6061 Aluminum
6063 Aluminum
C36000 Free Cutting Brass
Patient Flow
Connexall
By automating common processes such as admissions, housekeeping, transport, and discharges, Connexall has helped clients reduce patient wait times by more than 50 percent and no-shows by 97 percent.
Gallery - SubSeaSail
SubSeaSail
Patented, Game Changing Unmanned Autonomous Surface Vessel (USV) Engineered for Simplicity
SeaBat F50
Teledyne Marine
The SeaBat F50 focused beams, high ping rate and bandwidth combine to provide the user with superior resolution and image quality. The use of multibeam sonar technology allows for nearly instantaneous update of the sonar image, which provides information to the user faster than mechanically scanning sonars.
The SeaBat F50 makes full use of Commercial-off-the-Shelf (COTS) hardware and software to increase cost-effectiveness with a well-defined path for future upgrades and expansion.
Unique combination of wide sector coverage and narrow beamwidth to support applications including MCM, classification of underwater intruders or support of offshore construction - flexibility of use ensures you get the most from your investment
The SeaBat F50 makes full use of Commercial-off-the-Shelf (COTS) hardware and software to increase cost-effectiveness with a well-defined path for future upgrades and expansion.
Unique combination of wide sector coverage and narrow beamwidth to support applications including MCM, classification of underwater intruders or support of offshore construction - flexibility of use ensures you get the most from your investment
HIGH-PERFORMANCE PARTNER FOR AVIATION
Montana Aerospace
The core competences of Montana Aerospace include the development and production of heavily stressed aircraft parts. Our product portfolio ranges from more than 20 meter long structural components for fuselage, wings and landing gear to critical connection components of the engine mount, thermally and mechanically highly stressed engine components and functional components for cabin interiors.
Utah: A Hidden Life Science Gem
World Trade Center Utah
Lift Tools
General Dinamik, PT
GSE Mounting lift tools are typically equipped with powerful lifting systems, such as hydraulic or pneumatic systems, that enable technicians to lift and move aircraft components safely and efficiently. These tools are also often equipped with stabilizing devices or supports to ensure that the component remains in the correct position during installation or maintenance.
Video - How to get a Greeniche product delivered at your door step
Greeniche Natural Health Inc.
Remember the time when the best of medicines used to come all the way across the seven seas taking at least half a month?In today's technologically advancing...
NeedleVue™ Ultrasound System
DeepSight Technology, Inc.
DeepSight’s NeedleVue™ technology will redefine ultrasound-guided procedures by delivering real-time, ultrasound-based localization of the instrument tip with unmatched accuracy. Designed to seamlessly integrate into standard clinical workflows, NeedleVue aims to eliminate the need for radiation or electromagnetic tracking systems—offering a simpler and more intuitive solution. By providing precise tip visibility even in challenging anatomy, NeedleVue empowers clinicians to perform biopsies, ablations, and targeted therapies with greater confidence and control, ultimately improving procedural outcomes and patient outcomes.
