_700.webp)
EAS offers sales, acquisition and brokerage services in all aircraft markets, and is a proud IADA Accredited Dealer and part of Aircraft Exchange.
Active in all markets, EAS specializes in turboprops and small to mid-size jets.
• Customized fabricated medical sidewall
• Ceiling Brownline track for medical mounts
• Sidewall pneumatic outlets/electrical outlets
• Customized shelving racks
• Customized cockpit and cabin USB charging solution
• LED cabin lighting with LED spot lighting for patient loading and care
• Loncoin medical flooring with foam backing
• SATCOM System
• Stainless steel partition covers
• Custom medical cabinets
• Cabin intercom system with 2-way isolate and call functions
• Seat covers with custom embroidery
• Environmental Survey and Management
• Fire Detection and Monitoring
• Law Enforcement, Military, and Homeland Security Missions
• Maritime Surveillance
• Search and Rescue
• Target Acquisition, Identification, and Tracking
Compatible - Retractable unit is compatible with most ISR sensor systems such as:
•Trakka Systems, FLIR Systems, Inc, L3Harris Technologies, Collins Aerospace, Raytheon Intelligence & Space, Churchill Navigation, and others
Simplistic, Compact & Lightweight Design
• Simplistic and compact design, belly-mounted, and 100% contained within cargo pod with retractable door
• Protects sensor from the elements to and from the target area and off-airport operations
• Enables covert operations
• Lightweight design results in more fuel capacity extending the aircraft endurance and time on station
• Reduced maintenance man hours in operational support
• Parts are PMA-approved; major components are COTS (commercial off-the-shelf)
Aircraft Certification
• Initial FAA STC (SA04567CH) is certified for the Daher Kodiak 100 aircraft and is planned to certify on additional aircraft
• Kodiak is designed for off-airport ops and short take-off and landing (STOL)
Specifications
• Dimensions: 35X25X16
• Weight: RCM + Door Assembly and installation hardware: 110 lbs
• Payload: 120 lb. sensor
• Power Requirements: 28 volts, 15 Amps
• Cargo Pod opening: 23.5” long, 18.5” wide
• EMI Shielded Circuits
• Sealed Actuator- Self Lubricating, Moisture Resistant
RCM Kit Includes
• Retractable Camera Mount System with universal sensor mounting plate
• Retractable Cargo Pod Door System
• Engine Breather Extension
• Wire Harness
• Handheld controller
• RCM Installation Manual
• Fuselage Ejectable Flare Rack
• Left and Right Burn-in-Place flare racks
• Firing Control Boxes (2)
• Datalogger
• GPS Antenna for Datalogger
• Datalogger Cockpit Display
• WMI Wiring
• Aircraft Flight Manual Supplement
• Instructions for Continuous Airworthiness
The above capability and installations are available with full operational authority as well as being removable in order to utilize dual Airworthiness Categories of Normal and Restricted.
Weather Modification International STC SA03025CH was utilized and has FAA authority for installation of multiple Aerial Measurement configurations and missions to include the following:
• Ejectable Cloud Seeding Flares
• Burn-in-Place Cloud Seeding Flares
• 3-Dimensional Wind Measurements
• Cloud Condensation Nuclei Measurements
• Aerosol Spectrometer
• Precipitation Imaging
• Cloud Droplet Imaging
• Cloud Droplet Spectrometer
• Isokinetic Aerosol Inlet
• Icing Rate Meter
• Liquid Water Content (LWC) and Total Water Content (TWC) Measurements
• Total Air Temperature Sensor
• Dropsonde Deployment System
• Stepped Frequency Microwave Radiometer
• G-Band Water Vapor Radiometer
• Data Acquisition System
• Pan/Tilt/Zoom Dome Camera
• Structural Hard Points and Pylons
• Aircraft Power Distribution System
• Cabin Equipment Racks
• GPS-Based Tracking System
• Integrating Nephelometer
• Trace Gas Measurements NOy, NOx, O3, SO2, H2O, CH4, CO, CO2
• Radiation Detection
• Iridium Satellite Communication and Data Transfer
The above capability and installations are available with full operational authority as well as being removable in order to utilize dual Airworthiness Categories of Normal and Restricted.
Fargo Jet Center’s maintenance and avionics teams are celebrating multiple awards and achievements received in 2025, recognizing excellence in ongoing education and alignment to industry standard credentialing.
The maintenance team was honored with the Aviation Training Excellence Award from the Aircraft Electronics Association (AEA), and an Employer Recognition Award from the National Air Transportation Association (NATA). Both awards recognize aviation maintenance organizations that demonstrate a commitment to continuing training and education. Additionally, the team was awarded an AMT Employer Diamond Award of Excellence from the Federal Aviation Administration (FAA), given to organizations with 100% of eligible employees completing an AMT Certificate of Training in a calendar year.
In the avionics department, avionics leads Drew Stiles, Jon Stevens, and Will Dillamon, and avionics technicians Dave Mohn, Hayden Larson and Karson Ferden have passed the AEA’s new Certified Aircraft Electronics Technician (CAET) Exam, to earn their CAET Certification. Introduced earlier in 2025, the CAET Certification signifies that technicians are well-versed in the latest industry standards and best practices. Facilities with CAET Certified technicians provide enhanced quality of maintenance and repairs, and are committed to the safety and efficiency of aviation operations.
“Fargo Jet Center is committed to providing our customers with the highest level of service,” said Mitch Lutze-Morris, Fargo Jet Center Chief Inspector. “Continuing education for our teams, and aligning to industry best practice certifications, ensures we are at the forefront of providing innovative and safe aviation maintenance.”
