The importance of sustainable lighting installations is widely acknowledged, and a light management system (LMS) will allow you to optimise the use of artificial light where and when it is needed. Smart sensors and monitoring features allow you to increase energy savings, extending the lighting installation’s lifetime. They also reduce maintenance costs as well as the carbon footprint. Focusing on people’s needs, lighting solutions can be tailored to accommodate different tasks and purposes, improve the wellbeing of occupants and compensate for lacking natural light.

High quality Surface mounted Led luminaire for kitchens, galleys, pantries and provision stores, where there are strict hygiene rules. According to rules of USPH (U.S. Public Health) and maritime classification societies, additional VDE and IEC/CN. Ground plate in stainless steel. High quality silicone gasket to sit firmly against stainless ceiling. Gear tray zinc coated steel and epoxy powder coated, white RAL 9016. Galley luminaires with their flat design are easy to install and maintain. Easy to clean. 2800lm is equal in size to 2x14W T5 or 2x18W T8 5500lm is equal to 2x28W T5 or 2x36W T8. Battery back-up versions are also available.

The luminaire is a surface mounted 28W LED to provide compartment illumination of passageways, flight crew rooms and night duty areas. The product consists of a base unit, LED NVIS white module, diffuser lens lid, choice of 230Vac or 115Vac dual output power supply with EM mode and manual override switch, emergency battery pack with charging circuit, fault indication, test button and reduced level illumination suitable for use with Night Vision Goggles & external fixing brackets.

NVG Specification
DEF STAN 02-587 Pt3
Compliance to CAT B1
"Exterior Area Illumination" (MAX NRA 1.0E-9) MIL-STD-3009:
NVIS White IAW MIL-STD-3009 Colour Limits
Report No. CTL08-18 REV1

Shock Tested to UK MOD Standards

IP Rating: 56

The luminaire is a surface mounted 25W LED to provide general illumination of compartments. The product consists of a base unit, LED white module, diffuser lens lid, choice of 230Vac or 115Vac single output power supply and external fixing brackets.

Shock Tested to UK MOD Standards

IP Rating: 56

The luminaire is a flush mounted 26W LED to provide general illumination of compartments. The product consists of a base unit, LED white module, diffuser lens lid, choice of 230Vac or 115Vac single output power supply with EM mode and manual override switch, emergency battery pack with charging circuit, fault indication, emergency test button & anti-vibration gasket and external fixing brackets.

Shock Tested to UK MOD Standards

IP Rating: 56

LED Mirror lamp for wall mounting above or on side of mirror. Rectangular design. Correct mirror lighting with soft light distribution. Robust, steel housing with spring operated plastic end caps. Powder coated white RAL9016. OP = Diffuser in Opal polycarbonate V0 quality. S = Switch, U = Universal razor socket with transformer and selector 230/110V. 300 HF replaces 8W tube, 800 HF replaces 15W tube and 1000 HF replaces 18W T8 tube. Due to latest LED technology the lamp is energy and maintenance saving

The Series 66N is available in Single, Double, Single Arctic and Double Arctic versions. Arctic versions are intended for use in low temperature areas, and includes a heating foil, on the inside of the glass lens. Series 66N MIL covers a complete range of LED Navigation lights for Naval applications for ships from 20 meters in length, and fulfils all requirements of International Regulations for Preventing Collisions at Sea 1972 (COLREG) which are published by the International Maritime Organization (IMO) as well as special Naval requirements, such as NVG compatibility, and dimmable. The Series 66N MIL is developed to meet the specific needs of Naval Ships. It is designed and tested according to MIL specifications for EMC, Shock, and Vibration. The product range also includes special versions with Flashing, Hoisting, Contour and Steering Lights. The Naval Navigation Lights can be grouped and programmed according to customer requirements. SRTP (Safe Return To Port) can also be offered as an option on MIL Navigation Light Systems. Navigation Light voltage is 24V DC, but the Navigation Light Controller Voltage is flexible and the system input power to the Switch Cabinet can be 24V DC, 115V AC or 120-240V AC. The Series 66N MIL has Wheelmark (MED Certificate - Approved by DNV). UL1104 and USCG certification pending.

SL2 searchlight now fitted with a thermal camera for improved night vision capacity. Very useful for navigation and searching as well for security or surveillance means. It is part of the Luminell 3G control system and can be connected in a system with all the variants of SL2 and CL25/35/38 models, aswell as integration into a third party Bridge System ( WECDIS ) . The thermal night vision camera is placed in a robust housing on an internal special tilt unit. This means that the camera always follows the searchlight horizontal movement from the joystick though limited in tilt. The SL2IR is a compact sized (40,000lm ) and very robust searchlight giving great performance. Based on innovative LED- and FLIR technology, to meet the harsh marine conditions, virtually without maintenance maximizing time in operation. For Tech Spec and mechanical features please see SL2. - A proven robust and functional design - Maintenance free - Heated front window - Uncooled LWIR Thermal imager - 640x512 resolution - 60Hz - Field of View 24° - Zoom 2x, 4x - Palette options Please note that Export restrictions apply.

The luminaire is a surface mounted 3W dimmable LED to provide general illumination of compartments. The product consists of a base unit with gooseneck and bezel fitting, LED Nichia 3K 90CRI module with Ledil reflector, clear lens and choice of 230Vac or 115Vac single output power supply providing an isolated SELV DC output to the LED.

Shock Tested to UK MOD Standards

IP Rating: 44

ASC NL100 complete unit contains a main control with touch or foil panel for flush mounting, relay modules for lanterns connection and power supply unit for installation inside of bridge console or in technical room. It runs under a user-friendly and easy-to-use operation. An open-protocol (based on NMEA0183) offers direct remote-control-of relay modules from Integrated-Bridge-System (IBS). The ASC NL100 can handle vessel’s input power supply voltage (including main and standby) of range 100VAC-230VAC (50/60Hz) and 24VDC. Moreover, it may contain up to 14Pcs. of relay modules. The ASC NL100 monitors dual (main and standby) power supply with manual or automatic switch-over function. It continuously monitors the status of lights that are switched on and light's circuitry by checking current for each connected navigational light or All-round light. If the current drops below threshold, the alarm is activated and the system automatically switches to spare light (if exists), however this provides more safety. Each light output is protected by melting fuse or circuit breakers. All Relay modules are equipped with manual override activation features which allow operation even in case of electric failure. The ASC NL100, in maximum configuration, controls up to 64 Nav-Lights. It is tested and compatible with standard incandescent bulbs and Glamox / aqua signal LED navigation lights Series 55, 65, 60, 61, 70/70(M), 75(D), 66N(D) MIL, and 76N(D), both Standard and Arctic variants. In addition, The ASC NL100 is DNV certified. The ASC NL100 system requirements according to DNV: - Control via one or more foil panels, a Touch Panel PC or from third party systems such as IBS - Manual or automatic switch-over to spare light in case of main Navigation light malfunction - Manual override function - Only one type of relay module for all voltages - Navigation lights may be mixed incandescent or LED - Standard interface to external systems with NMEA0183 (basic) (further Modbus-TCP with PLC and Touch Panel PC). It is highly flexible and available with standard cabinet sizes (small, medium, large and custom) or as mounting plates or even single components, and setups (E.g. 8+8 (8 main and 8 standby), 16+16 (16 main and 16 standby), 16+16+16 (24 main and 24 standby), 4x16 (32 main and 32 standby), and customized circuits). - Factory pre-configured and checked to rules for customers safety - DNV certified - Flush mounted FP housing selectable in 3 standard sizes, incl. - Up to 5 FP in one system - Safe-Return-to-Port (SRtP) functionality with at least 2 FP - Alarm function optical, acoustic ASC NL100 - Control with PLC via Touch Panel PC (TP): - High class ASC NL100 with newest maritime certified PLC and up to 5 TP in one system - Highly free configurable and even free programmable GUI for standard and custom solutions - Works with all standard ASC NL100 relay modules - All settings may be fine-tuned or completely re-programmed by customers directly from the setup screen - Alarm functions optical, acoustic and log file - Flexible screen setup incl. custom solutions - Standard interface to external systems with NMEA0183 (basic)and Modbus-TCP.

TL44-S G2 LED is a flexible and streamlined splash proof luminaire for surface mounting. With its slim design and efficient functionality, TL44-S G2 is a practical solution for many different applications. It is easily fitted onto ceilings or walls. TL44-S G2 LED is equally elegant in a corridor or on the bridge or in an engine room with stringent demands for IP class, good EMC performance and high luminosity. The luminaire housing is made of galvanized pre-painted steel with a second layer of white epoxy/polyester powder coated finish to achieve extra protection against corrosion. End caps in injection molded ASA with integrated locking device to prevent the luminaire being opened without any tools. The diffuser is made of extruded fire rated opal PC. TL44-S G2 LED can be supplied with DALI dimming or ultrasonic movement sensors. Also CCT versions available. Installation solutions with sensors or dimming are useful energy saving options. This will also increase the lifetime of components. Emergency variants with 3 hour battery back-up.

The luminaire is a surface mounted external dimmable 48VDC NVIS White LED with angle adjustable bracket to provide illumination of areas such as the RAS Decks and Mission Bay Side Doors and other areas for areas where reduced level NVG is required. The product consists of a Heatsink unit with LED NVIS white module suitable for use with Night Vision Goggles, RCS shield deflectors & diffuser lens. The unit is supplied with a 2m screened flying lead. The dimmable PSU is located in the PSU Junction Box FLD100-JUNC-01.

NVG Specification
DEF STAN 02-587 Pt3
Compliance to CAT B1
"Exterior Area Illumination" (MAX NRA 1.0E-9) MIL-STD-3009:
NVIS White IAW MIL-STD-3009 Colour Limits
Report No. CTL15-18 REV4

Shock Tested to UK MOD Standards

IP Rating: 67

MIRN G2 is designed for a wide range of application areas such as engine rooms, storage rooms, passageways, hanger etc. IP66/67. Furthermore, housing is available in Navy Grey (RAL 7035) in stainless-steel material for open deck applications and in white for the Zink coated steel version for interior areas. Some of the key features include: 400g MIL shock tested - Voltage: Wide range driver that covers 115, 120 and 230VAC. It also covers 230VDC with standard driver. - Emergency battery backup with 3Hrs (EB3/S) and 24VDC Centralized emergency powered via UPS (E24) –
Colours: White, Night adaptation red, NVIS Green and two colours in one linear - Available with DALI and 1-10V dimming - Available with EMC1 - Brass nickel-plated cable glands - External grounding –
Lumen output: 2500lm
MIR G2 ( Marine ) - Marine Certified variants also available MIR G2 (Marine) - are manufactured according to IEC 60092-306
Lumen output: 2500 - 7500lm

For operation, the system is completed by lighting control panels with optional touch panel to monitor aviation weather, ship movement and wind limitations, as well as to control helideck equipment (e.g. refuelling, GPU and firefighting). The Helicopter Integrated Monitoring & Control System (HCIMCS) offers a complete comprehensive NVG-compatible helideck system solution and is developed on a turnkey basis and meets various customer requirements. In addition to HVLAS lighting, we also offer lighting for the helicopter hangar area and for the helicopter fuelling zone. These lights are fully MIL-tested for EMC, shock and vibration and also include options for NVG and night adaptation colours.
High range for the glide path indicator (>5 NM) and exact light distribution due to the use of the latest LED technology and high precision optics.
Complete NVG-compatible.
Two modes of operation for the complete system (NVG-mode, Normal-mode).
High brightness due to LED technology for safe daylight and poor weather operation.
Outside mounting due to non-corrosive anti-magnetic materials.
Radar cross-section reduced.
Proved according to the latest relevant shipbuilding and aviation standards.
Long lifetime.
Extremely low lifecycle costs due to LED technology.
Low mounting and cabling costs due to a fully integrated system.
Integrated system for all flight deck operations.
Easy exchange of single components due to a modular system design.
Minimized maintenance costs and reduced power consumption (high energy efficiency).
Mechanical strength/impact resistance.

The RLX range has been on the market for more than a decade, adding significant value to its users by its rugged design and fantastic light performance. With tens of thousands of lights installed worldwide in the harshest and most unfriendly environments both onshore and offshore, the RLX has proven itself to endure and function, for improved performance and wellbeing of people. With beams from Spot 10 degree to Wide 110x45 degree, the RLX D can solve light challenges in an excellent way, and replace and outperform conventional lights sources and other LED alternatives that are much more powerful and with much more lumen output. Whilst the RLX B is a small, but powerful 24vdc Floodlight, particularly useful for upperdeck stations. The RLX D G2 is also available in 24VDC versions, either as 160W or 240W. - Flicker Free - Made to handle shocks and vibrations - No maintenance - Designed and produced in Scandinavia - Compact, robust and sealed - Excellent EMC characteristics - Encapsulated internal electronics - Automatic electronic temperature protection - No ballast required - Available in 24VDC - Corrosion class C5m

The luminaire is a surface mounted 12W LED to provide general illumination of compartments. The product consists of a base unit, LED white module, diffuser lens lid, choice of 230Vac or 115Vac single output power supply, emergency battery pack with charging circuit and fault indication.

Shock Tested to UK MOD Standards

IP Rating: 56

The luminaire is a surface mounted 28W LED to provide general illumination of compartments. The product consists of a base unit, LED white module, diffuser lens lid, choice of 230Vac or 115Vac single output power supply with EM mode and manual override switch & emergency battery pack with charging circuit, fault indication, emergency test button and external fixing brackets.

Shock Tested to UK MOD Standards

IP Rating: 56

The luminaire is a surface mounted 48VDC, 10,000 lumen 4000k white 80CRI LED flood light to provide general illumination for compartments with increased deck head heights. The product consists of a base unit, LED white module, diffuser lens, 2m screened flying lead & lockable tilt brackets to allow alignment. The PSU’s is housed in the external Junction Box FLD100-JUNC-01.

Shock Tested to UK MOD Standards

IP Rating: 67

Glamox AL42-W is a compact designed bed light. It has a characteristic modern look and is designed to meet maritime requirements. AL42-W is available with dimming switch (S-DIM), or with dimming switch (S-DIM) and double USB port A+C (USB). Available in right- and left-handed versions in black and in white. Due to LED technology the light is energy saving with only 6W at 353lm light output. It is easy to install - only three screws for fixing, connect and fix cover - Mobile device Shelf is also available - recommended if selecting the USB variant.

AL40N-R designed according to DNV. AL40N-R is our most efficient recessed luminaire for naval applications. This indoor and non-upgradable luminaire product family has variants with EMC1 and EMC2. Furthermore, it has been tested according to partial MIL shock test (100g). It also covers special Navy requirements such as dimming, night adaptation red, and NVIS Green (Option). Some of the key features include: - Declaration of Conformity (DOC) and DNV (Certificate pending) - 100g MIL shock tested - Voltage: Wide range driver that covers 115, 120 and 230VAC - Emergency battery backup with 3Hrs (E3) and Centralized emergency powered via UPS (E24) - Colors: White and Night adaptation red (NVIS Green – Option) - Available with DALI and 1-10V dimming - Available with EMC1 and EMC2 - External earthing and Brass nickel-plated cable glands - Lumen output: 2200 lm (White) - Lifetime: 100 000 hrs. at L70 Ta45 - 5-year warranty This innovative LED indoor lighting fixture is applicable for a wide range of different indoor areas such as common areas, cabins, bridge and corridors. Furthermore, it is designed to meet naval requirements at the same time as saving energy and maintenance costs.

With its timeless design, wall mounted Walle is suitable for a wide range of applications. Walle is available with white-painted steel housing and Opal Polycarbonate diffuser.
made of stainless steel.