SYSCOM KOREA CO., LTD.
See us at Seoul ADEX 2025
Syscom Korea Co., Ltd. produces and supplies interface devices for extending the transmission distance of machine vision cameras. These interfaces extend the transmission distance of high-precision, large-capacity images and transmit them in real-time without any loss.
Sujeong-gu Seongnam-si, Gyeonggi-do, South Korea
Aerospace
Products & Services
Plug and Play USB3.0 Fiber Optic Extender (Fiber Repeater) , FU3-1T/R
Syscom Korea Co., Ltd.
Machine vision system
Factory automation
Medical imaging systems
Robot eyes
Factory automation
Medical imaging systems
Robot eyes
Camera link Fiber Optic Extender FOR-30T/R , Base/Medium/Full configuration
Syscom Korea Co., Ltd.
*Perfect automatic camera matching for all types of vision cameras.
* Fully supports the Camera Link interface (Area/Line Scan).
*User-friendly,No need to modify firmware for frequency compatibility.
*Compatible with "10 TAPS@85MHz" internal/external RS232C,
all baud retes(20MHz~85MHz),and digital user IO.
*Compatible with Base/medium/Full configurations.
*Provides camera power from the Tx box.
*SFP type module
*Works with moving and non-moving fiber cables.
* Fully supports the Camera Link interface (Area/Line Scan).
*User-friendly,No need to modify firmware for frequency compatibility.
*Compatible with "10 TAPS@85MHz" internal/external RS232C,
all baud retes(20MHz~85MHz),and digital user IO.
*Compatible with Base/medium/Full configurations.
*Provides camera power from the Tx box.
*SFP type module
*Works with moving and non-moving fiber cables.
Camera link Repeater CLR-30 , Base/Medium/Full configuration
Syscom Korea Co., Ltd.
The maximum transmission distance varies based on the following frequency-related specifications.
Camera Frequency Max Cable Length
================ ===============
20 ~ 60 MHz 10 m
60 ~ 80 MHz 7 m
80 ~ 85 MHz 5 m
The CLR-30 amplifies and transmits Camera Link signals in Base/Medium/Full configurations (up to 10 Taps supported) from a camera to a PC frame grabber.
Key Features
Fully supports the Camera Link interface (Area/Line Scan).
Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL).
Supports pixel frequency from 20 to 85 MHz.
Supports 10 Taps cameras.
Enables lossless transmission.
Provides additional full-duplex RS232 communication at up to 256 Kbps.
Supports PoCL signal bypass (patented).
Features a locking DC power jack (Molex) and SDR connectors.
Compact size compared to previous models.
Camera Frequency Max Cable Length
================ ===============
20 ~ 60 MHz 10 m
60 ~ 80 MHz 7 m
80 ~ 85 MHz 5 m
The CLR-30 amplifies and transmits Camera Link signals in Base/Medium/Full configurations (up to 10 Taps supported) from a camera to a PC frame grabber.
Key Features
Fully supports the Camera Link interface (Area/Line Scan).
Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL).
Supports pixel frequency from 20 to 85 MHz.
Supports 10 Taps cameras.
Enables lossless transmission.
Provides additional full-duplex RS232 communication at up to 256 Kbps.
Supports PoCL signal bypass (patented).
Features a locking DC power jack (Molex) and SDR connectors.
Compact size compared to previous models.
Camera link Fiber Optic Extender, FOR-10T/R, Base Configuration
Syscom Korea Co., Ltd.
The FOR-10T/R supports Base configurations (including 10 Taps) and enables long-distance transmission of image signals via optical fiber, along with RS232 control signals and CC1~4 trigger signals. These signals are transmitted to the PC. This product supports transmission distances of up to 2 km, and by replacing the optical module, even longer distances can be achieved.
Fully supports the Camera Link interface (Area/Line Scan).
Supports Base (including 10 Taps) configurations
(CC1~4, RS232, 10 Ports (Taps), LVAL, DVAL, FVAL).
Supports pixel frequency from 20 to 85 MHz.
Maximum transmission distance: 2000 [m].
Enables lossless transmission.
Supports all external full-duplex RS232 communication speeds on a single port.
Features a locking DC power jack (Molex).
Camera link Connector Type : SDR connector.
Fully supports the Camera Link interface (Area/Line Scan).
Supports Base (including 10 Taps) configurations
(CC1~4, RS232, 10 Ports (Taps), LVAL, DVAL, FVAL).
Supports pixel frequency from 20 to 85 MHz.
Maximum transmission distance: 2000 [m].
Enables lossless transmission.
Supports all external full-duplex RS232 communication speeds on a single port.
Features a locking DC power jack (Molex).
Camera link Connector Type : SDR connector.
Coa XPress Repeater, CXR-2C , 2CH x 12.5Gbps (Max. 25Gbps) , World’s Smallest Size
Syscom Korea Co., Ltd.
This product supports the following transmission standards.
Designation Bit Rate
========== ==========
CXP-1 1.250 Gbps
CXP-2 2.500 Gbps
CXP-3 3.125 Gbps
CXP-5 5.000 Gbps
CXP-6 6.250 Gbps
CXP-12 12.500 Gbps
The CXR-2C amplifies and transmits image signals from 1/2-channel CoaXPress cameras to a PC frame grabber. Typically, transmission matches the distance between the camera and the device. Transmission distance depends on the coaxial cable type, and due to significant variability, specific distances are not provided.
Designation Bit Rate
========== ==========
CXP-1 1.250 Gbps
CXP-2 2.500 Gbps
CXP-3 3.125 Gbps
CXP-5 5.000 Gbps
CXP-6 6.250 Gbps
CXP-12 12.500 Gbps
The CXR-2C amplifies and transmits image signals from 1/2-channel CoaXPress cameras to a PC frame grabber. Typically, transmission matches the distance between the camera and the device. Transmission distance depends on the coaxial cable type, and due to significant variability, specific distances are not provided.
4:1 Camera link Multiplexer ( Camera Selector) CLM-30C4 , Base/Medium/Full configuration
Syscom Korea Co., Ltd.
The maximum transmission distance varies based on the following frequency-related specifications.
Camera Frequency Max Cable Length
================ ===============
20 ~ 60 MHz 10 m
60 ~ 80 MHz 7 m
80 ~ 85 MHz 5 m
The PoCL Bypass function supports Power over Camera Link (PoCL) operation from the Frame Grabber to the selected camera. However, the power supply to unselected cameras is automatically disabled. To prevent power cutoff, separate power must be provided to the cameras. Configurations are available as follows, including image signal amplification.
[Features of CLM-30C4]
Fully supports the Camera Link interface (Area/Line Scan).
Provides manual (switch) or remote (RS232) camera selection.
Allows selection from one of four cameras configured for Base (Layer 1) or Medium/Full (Layer 2) levels.
Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL)
PoCL bypass function: Automatically powers only the selected camera when PoCL-compatible cameras, frame grabbers, and cables are used.
Supports pixel frequency from 20 to 85 MHz.
Supports PoCL signal bypass (patented).
Enables lossless transmission.
Provides additional full-duplex RS232 communication at up to 256 Kbps.
Features a locking DC power jack (Molex).
Camera Frequency Max Cable Length
================ ===============
20 ~ 60 MHz 10 m
60 ~ 80 MHz 7 m
80 ~ 85 MHz 5 m
The PoCL Bypass function supports Power over Camera Link (PoCL) operation from the Frame Grabber to the selected camera. However, the power supply to unselected cameras is automatically disabled. To prevent power cutoff, separate power must be provided to the cameras. Configurations are available as follows, including image signal amplification.
[Features of CLM-30C4]
Fully supports the Camera Link interface (Area/Line Scan).
Provides manual (switch) or remote (RS232) camera selection.
Allows selection from one of four cameras configured for Base (Layer 1) or Medium/Full (Layer 2) levels.
Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL)
PoCL bypass function: Automatically powers only the selected camera when PoCL-compatible cameras, frame grabbers, and cables are used.
Supports pixel frequency from 20 to 85 MHz.
Supports PoCL signal bypass (patented).
Enables lossless transmission.
Provides additional full-duplex RS232 communication at up to 256 Kbps.
Features a locking DC power jack (Molex).
Coa XPress Repeater, CXR-4C , 4CH x 12.5Gbps (Max. 50Gbps) , World’s Smallest Size
Syscom Korea Co., Ltd.
CoaXPress enables bidirectional transmission of data transfer, camera control, power supply (PoCXP), and triggering over a single coaxial cable.
This product supports the following transmission standards.
Designation Bit Rate
========== ========
CXP-1 1.250 Gbps
CXP-2 2.500 Gbps
CXP-3 3.125 Gbps
CXP-5 5.000 Gbps
CXP-6 6.250 Gbps
CXP-12 12.500 Gbps
The CXR-4C amplifies and transmits image signals from 1/2/4-channel CoaXPress cameras to a PC frame grabber. Typically, transmission matches the distance between the camera and the device. Transmission distance depends on the coaxial cable type, and due to significant variability, specific distances are not provided.
4 CH x 1 Camera Configuration
2 CH x 2 Camera Configuration
1 CH x 4 Camera Configuration
2 CH + 1CH Camera Configuration
This product supports the following transmission standards.
Designation Bit Rate
========== ========
CXP-1 1.250 Gbps
CXP-2 2.500 Gbps
CXP-3 3.125 Gbps
CXP-5 5.000 Gbps
CXP-6 6.250 Gbps
CXP-12 12.500 Gbps
The CXR-4C amplifies and transmits image signals from 1/2/4-channel CoaXPress cameras to a PC frame grabber. Typically, transmission matches the distance between the camera and the device. Transmission distance depends on the coaxial cable type, and due to significant variability, specific distances are not provided.
4 CH x 1 Camera Configuration
2 CH x 2 Camera Configuration
1 CH x 4 Camera Configuration
2 CH + 1CH Camera Configuration
16CH Precision Trigger Generator , TGen-16C
Syscom Korea Co., Ltd.
It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices.
Periodic Mode: Continuously generates trigger signals after configuration.
Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication.
*** Product Expansion and Usage ***
Four Operating Modes
Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.
Burst mode: Generates a single-cycle signal synchronized with a software trigger.
External trigger mode: Generates a single-cycle signal synchronized with an external trigger.
External trigger bypass mode: Distributes signals triggered externally.
Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).
By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input:
Outputs 1 to 15 of the Master TG remain unchanged.
Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output.
(Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).
Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).
Periodic Mode: Continuously generates trigger signals after configuration.
Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication.
*** Product Expansion and Usage ***
Four Operating Modes
Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.
Burst mode: Generates a single-cycle signal synchronized with a software trigger.
External trigger mode: Generates a single-cycle signal synchronized with an external trigger.
External trigger bypass mode: Distributes signals triggered externally.
Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).
By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input:
Outputs 1 to 15 of the Master TG remain unchanged.
Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output.
(Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).
Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).
1:2 Camera link Splitter CLS-30T2S , Base/Medium/Full configuration
Syscom Korea Co., Ltd.
The maximum transmission distance varies based on the following frequency-related specifications.
Camera Frequency Max Cable Length
================ ===============
20 ~ 60 MHz 10 m
60 ~ 80 MHz 7 m
80 ~ 85 MHz 5 m
In cases where a single PC cannot handle large amounts of image data, it becomes necessary to duplicate the image and use multiple PCs for processing. A splitter is required in such scenarios.
The CLS-30T2S amplifies and transmits image signals from a single camera to up to two PCs, supporting Base/Medium/Full configurations (10 Taps supported).
The Master side transmits RS232 and CC1~4 signals, while the Slave side replicates and transmits image signals only.
Camera Frequency Max Cable Length
================ ===============
20 ~ 60 MHz 10 m
60 ~ 80 MHz 7 m
80 ~ 85 MHz 5 m
In cases where a single PC cannot handle large amounts of image data, it becomes necessary to duplicate the image and use multiple PCs for processing. A splitter is required in such scenarios.
The CLS-30T2S amplifies and transmits image signals from a single camera to up to two PCs, supporting Base/Medium/Full configurations (10 Taps supported).
The Master side transmits RS232 and CC1~4 signals, while the Slave side replicates and transmits image signals only.
Connect with us at
About
Syscom Korea Co., Ltd. produces and supplies interface devices for extending the transmission distance of machine vision cameras. These interfaces extend the transmission distance of high-precision, large-capacity images and transmit them in real-time without any loss.
This technology plays a crucial role in fields such as industrial automation, quality inspection, and robotic vision. Machine vision systems require fast and accurate processing of high-resolution images, making transmission distance and data loss critical issues. Korea Syscom’s interfaces address these issues, enabling stable and efficient image transmission.
This technology plays a crucial role in fields such as industrial automation, quality inspection, and robotic vision. Machine vision systems require fast and accurate processing of high-resolution images, making transmission distance and data loss critical issues. Korea Syscom’s interfaces address these issues, enabling stable and efficient image transmission.
